It's A Subaru Car Keys Replacement Success Story You'll Never Remember
Replacing a Subaru Car Key With an Unresponsive Button
If you own a Subaru car key that has an unresponsive button, it may be time to replace the battery. Capitol Subaru's service department can assist you with this simple procedure.
Open the key fob and locate the circuit board. Look for two sets of numbers with 8 digits and note the first one on a piece paper to refer to later.
Keyless entry
With keyless entry, you can unlock the doors and trunk of your Subaru without the use of an actual key. The car's computers detect the presence of the key fob through an radio signal and transmits an indication to unlock the doors or opening the trunk. You can also start or turn off the engine with this system. Certain advanced systems also offer remote starting, smartphone connectivity and alarms.
If you have lost your Subaru key fob an experienced locksmith will create an appropriate replacement. They can make high-security keys that are more difficult to duplicate. Or they can use laser-cut keys with complex designs that require special equipment. They can also help you determine the right key for your car and can install it for you.
Find out which kind of key you have. Then, open the fob's casing and examine the circuit board of the transmitter. There is likely to be one or two sets of 8-digit numbers on it. Write down the number, and then close the fob case. You'll hear a chime on the instrument panel and notice that the dome lights blink.
Transponder key
If you have a Subaru with keyless access, you'll need to be aware of how to change the battery on the key fob. Utilize a flathead tool to remove the old battery from your key fob for your car. It is then possible to replace it with a new one. Place the new battery the correct side in the case.
A transponder key (a blend of responder and transmitter) includes a microchip which communicates with your vehicle's ECU when it's activated. The chip has an unique serial number for your vehicle. It's also a security function that stops key duplicates.
A locksmith can program a transponder-key transponder for you, but it's best to choose an automotive locksmith who has the equipment and know-how to do so correctly. An incorrect procedure could cause damage to the transponder chip in the car key, which could cost you money for repairs. To program a car key, open and close the door for the driver, then turn your car's ignition off and then on. Repeat the process ten times and you'll be able to hear the panel sound chime after the tenth.
Keys that are cut in the side
More and more vehicles are equipped with side cut keys, also referred to as laser-cut keys. They are a more secure version of the traditional car keys. The edges of the key are designed in a manner that matches the profile of the lock tumblers. G28 of key is more difficult to duplicate, and requires a specially designed key duplicater machine to do the job.
To program the Subaru key fob, first locate the transmitter circuit board inside your key fob (instructions are in your owner's manual). Then, search for two or three sets of numbers (8-digits) on the board. Make a note of these numbers and keep them in your pocket. Close your doors and get in the driver's seat. Insert your new key into the ignition and turn the knob to the first position. After ten seconds the car will begin to unlock and get started.
When you have a spare fob you can replace the battery on your Subaru's key fob with ease. Find an opening in the slit between the front and back of the fob encasement. Make use of a small flathead screwdriver to pry the enclosure open, and then take out the smaller unit inside. Replace the battery with the new CR2025, making sure that it's inserted correctly.
Last-cut key
In contrast to traditional car keys made of metal they allow you to open your doors from several yards away. They also let you start the engine. The newer models of keys come with a carbon chip inside that emits an electronic signal. This adds another layer of security to your Subaru, making it more difficult for thieves to steal.
However, some drivers still prefer to have traditional keys to use as backup. If your key fob isn't working, you can try replacing the battery. If that doesn't work, then you should visit Hanson Subaru or another trusted locksmith for assistance.
If your Subaru is a model that is late that has an engraved key. This is similar to the Honda high-security HO01 or HO03. The type of key is equipped with four tracks, and is cut externally. It is able to be duplicated using the standard tools available at locksmiths and hardware stores, but it is not equipped with onboard programming. You can purchase this kind of key at most dealerships however, be aware that it will cost more than an edge-cut one.
Key code
Subaru key fobs are fitted with a security microchip that can be used to lock or unlock your vehicle. When the key is inserted into the ignition, it transmits a signal to a receiver on your dashboard. The key's unique signal must be acknowledged by the dashboard's receiver to start the engine. If your key fob won't work, it could be time to replace the battery.
Find the eight-digit code on your vehicle prior program the Subaru key. The code can be found on the original ring tag or on Subarunet. Once you have the code, open and shut your driver's door, then press the lock button a number of times equal to each digit in the code.
Then then, insert the new ignition key and turn it on. Don't start the engine. When the key fob begins working the security light should stop blinking. If not, you should replace the battery or contact an expert locksmith to resolve the issue.